P-971M User’s Guide

Chapter 6 Command Examples

60

6.3.3  goto_ds 

Syntax:

goto_ds  Frequency

This command sets the downstream channel (in MHz). If the device cannot use the specified 
rate, it automatically scans for the best channel to use. 

The following example sets the downstream channel to 400Mhz. 

Figure 28   

goto_ds Command Example 

CM/DocsisCtl> goto_ds 400     

6.3.4  scan_stop

Syntax:

scan_stop

This command stops the Prestige from downstream channel scanning. The following figure 
shows an example. 

Figure 29   

scan_stop Command Example 

Scanning plan at 2 -- HRC -- 400000000 Hz...
Scanning plan at 2 -- HRC -- 697784800 Hz...
Scanning plan at 2 -- HRC -- 703785100 Hz...

------------------------ [snip] ----------------------------

Scanning plan at 2 -- HRC -- 709785400 Hz...
Scanning plan at 1 -- EIA -- 171000000 Hz...
Scanning plan at 1 -- EIA -- 219000000 Hz...
Scanning plan at 1 -- EIA -- 225000000 Hz...
Scanning plan at 1 -- EIA -- 231012500 Hz...
CM/DocsisCtl> scan_stop

Instance:  DOCSIS Control Thread (0x80fcf840)

CM/DocsisCtl> Scanning plan at 1 -- EIA -- 237012500 Hz...
CM/DocsisCtl>