![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-167.png)
Dell™ Printer Configuration Web Tool
165
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click
Edit SNMP v1/v2 Properties
in the
SNMP
page.
Values:
SNMP Configuration
Enable SNMP v1/v2c
Protocol
Select the check box to enable the SNMP v1/v2c protocol.
Edit SNMP v1/v2c
Properties
Click to display the
SNMP v1/v2c
page and to edit the setting of SNMP
v1/v2c protocol from the page.
Enable SNMP v3
Protocol
Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the
SNMP v3
page and to edit the setting of SNMP v3
protocol from the page.
You can click this item only when SSL communication is enabled.
Community Name
Community Name
(Read only)
*1
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read Community is public.
Re-enter Community
Name (Read only)
*1
Enters the community name to access (read only) data again to confirm it.
Community Name
(Read/Write)
*1
Sets the community name to access (read and write) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read/Write Community is private.
Re-enter Community
Name (Read/Write)
*1
Enters the community name to access (read and write) data again to
confirm it.
Community Name
(Trap)
*1
Sets the community name used for trap up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for Community Name (Trap) in the previous settings will not be
displayed on the screen. The default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)
*1
Enters the community name used for trap again to confirm it.