![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-242.png)
240
Understanding the Printer Menus
Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Values:
When you specify 1 minute for
Sleep
, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 30 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any
button on the operator panel.
Date & Time
Purpose:
To specify the date and time formats.
Values:
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
NOTE:
The default for
mm/inch
varies depending on other settings, such as
Country
and
Document Size
.
Sleep
10 minutes
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
Available Range: 1–30 minutes
Deep Sleep
20 minutes
*
Specifies the time taken by the printer to enter Deep Sleep mode after it
has entered Sleep mode.
Available Range: 1–30 minutes
Time Zone
Sets the time zone.
Date
Sets the date depending on the
Format
settings.
Format
Sets the date format.
Time
Sets the time.
Format
12 Hour
Sets the time in 12-hour format.
24 Hour
Sets the time in 24-hour format.
Millimeters(mm)
*
Selects millimeter as the default measurement unit.
Inches(")
Selects inch as the default measurement unit.