![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-384.png)
382
Faxing
a. Transmission image quality
Purpose:
To set the output quality.
Values:
* Denotes the factory default setting.
NOTE:
Faxes printed in the Super-high image quality by Direct Fax driver transmits at the highest resolution supported by the
receiving device.
b. Transmission report
Purpose:
To specify whether to print a fax transmission result.
Values:
* Denotes the factory default setting.
c. Fax Cover Page
Purpose:
To specify whether to attach a cover page to your fax.
Values:
* Denotes the factory default setting.
Sender
Purpose:
To specify whether to print the sender’s name on the fax cover page.
Values:
* Denotes the factory default setting.
Standard
For documents with normal sized characters.
High Quality*
For documents containing small characters or thin lines or documents printed using a dot-
matrix printer.
Super-high image quality
For documents containing extremely fine detail. The super fine mode is enabled only if the
remote machine also supports Super Fine resolution. See the notes below.
Output regularly
Prints a transmission result after every fax transmission.
Output for non-transmission*
Prints a transmission result only when an error occurs.
Do not output
Does not print fax transmission results.
According to Printer Settings
Determines whether to attach a cover page to your fax depending on the setting you specify in
Fax Cover Page
on the operator panel.
Attach
Attaches a cover page to your fax.
None*
Does not attach a cover page to your fax.
According to Printer Settings*
Determines whether or not to print the sender’s name on the fax cover page based on the
printer settings.
Enter a sender name
Allows you to enter a sender’s name that will be printed on the fax cover page in
Sender
Name
.