![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-176.png)
174
Dell™ Printer Configuration Web Tool
IPsec
Purpose:
To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the
printer.
Values:
NOTE:
If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.
Certificate Details
*2
Category
Displays the device to certificate selected at the
Certificate Management
page or
SSL/TLS
page.
Issued To
Displays the device to certificate.
Issuer
Displays the issuer to certificate.
Serial Number
Displays the serial number of the device.
Public Key Method
Displays the public key method.
Size of Public Key
Displays the size of public key.
Valid From
Displays the time the certificate is valid.
Valid Until
Displays the time the certificate is invalid.
Status
Displays whether certificate is valid or not.
Certificate Purpose
Displays the purpose of certificate.
Certificate Selection
Status
Displays the type of device certificate you selected.
E-mail Address
Displayed only when an e-mail address is specified in the certificate.
Use this certificate
Click to apply this certificate to the device.
Delete
Click to delete this certificate.
Export This Certificate
Click to export the certificate to the other device.
*1
This item is available only when the self-signed certificate has been generated.
*2
This item is effective only when connected via SSL/TLS (https). Only the administrator is allowed to display the pages.
IPsec Settings
Protocol
Select the check box to enable the protocol.
Pre-Shared Key
Sets a shared key. Up to 255 alphanumeric characters, periods, and
hyphens can be used.
Re-enter Pre-Shared Key
Enters the shared key again to confirm it.
Device Certificate
Displays the device certificate.
IKE SA Lifetime
Sets the lifetime for IKE SA from 5 to 28,800 minutes.
IPsec SA Lifetime
Sets the lifetime for IPsec SA from 5 to 2,880 minutes.
DH Group
Sets the DH group.
PFS
Select the check box to enable the PFS setting.
Remote peers IPv4 address
Sets the IP address to connect to.
Remote peers IPv6 address
Sets the IP address to connect to.
Non IPsec communication
policy
Allows communication with a device which does not support IPsec.