![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-259.png)
Understanding the Printer Menus
257
Login Error
NOTE:
Login Error feature is available only when
Panel Lock Control
is set to
Enable
.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the
Admin
Settings
and
Report/List
menu.
Values:
NFC Authentication
Purpose:
To specify whether to enable the authentication using the NFC authentication card.
Values:
USB Settings
Use the
USB Settings
menu to change printer settings affecting a USB port.
USB Port
NOTE:
USB Port feature is available only for the USB port on the rear of the printer.
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
PS Data Format
Purpose:
To specify PostScript Level3 Compatible communication protocol for a parallel interface. You can configure the PS
Data Format settings for the wired network. The change becomes effective after the printer is turned off and then on
again.
Values:
Off
*
Does not allow an administrator to log in after one error entry attempt.
On
5
*
Sets the number of error entry attempts allowed when an administrator logs in.
Available Range: 1-10
Disable
Does not permit the authentication using the NFC authentication card.
Enable
*
Permits the authentication using the NFC authentication card.
Disable
Disables the USB interface.
Enable
*
Enables the USB interface.
Auto
Used when auto-detecting the PostScript Level3 Compatible communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP*
Used when the communication protocol supports both ASCII and binary data to switch
between them according to the specified control code.