![background image](/i/dell/161955/dell-c2665dnf/h/dell-c2665dnf-229.png)
Understanding the Printer Menus
227
WPS Setup
NOTE:
WPS Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network using WPS.
Values:
IP Mode
Purpose:
To configure the IP mode.
Values:
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
Transmit Key
Specifies the transmit key from
WEP
Key 1
*
,
WEP Key 2
,
WEP Key 3
, and
WEP Key 4
.
Push Button Control
*
Start Configuration
Configures the wireless setting with WPS-PBC.
PIN Code
Start Configuration
Configures the wireless setting using the PIN code assigned automatically by
the printer.
Print PIN Code
Prints the PIN code. Confirm it when entering PIN assigned to the printer
into your computer.
Dual Stack
*
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode
Uses IPv4 to set the IP address.
IPv6 Mode
Uses IPv6 to set the IP address.
Get IP Address
AutoIP
*
Sets the IP address automatically. A random value in the range of 169.254.1.0
to 169.254.254.255 that is not currently in use on the network is set as the IP
address. The subnet mask is set as 255.255.0.0.
BOOTP
Sets the IP address using BOOTP.
RARP
Sets the IP address using RARP.
DHCP
Sets the IP address using DHCP.
Panel
Use this option when you want to set the IP address manually on the
operator panel.
IP Address
When an IP address is being set manually, the IP is allocated to the printer
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for the first octet of a gateway
address.
Subnet Mask
When an IP address is being set manually, the subnet mask is specified using
the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is
a value in the range of 0 to 255.255.255.255.255 cannot be specified as the
subnet mask.