Test the scanner hardware
If you think that the scanner has a hardware problem, verify that the cables are firmly
connected to the scanner, the computer, and the power source. If the cables are correctly
connected, verify that the scanner is turned on.
To test the scanner hardware, follow these steps:
1.
Disconnect the USB, power, and TMA/ADF cables from the scanner.
2.
Reconnect the USB, power, and TMA/ADF cables to the scanner.
The carriage on the scanner will move forward and backward approximately 25 mm
(1 inch), and the lamp will turn on.
If the carriage does not move and the scanner lamp does not turn on, a problem might
exist with the scanner hardware.
See also
•
“Scanner has stopped working properly” on page 31
•
•
“Check the USB connection” on page 29
Scanner has stopped working properly
If the scanner stops scanning, complete the following steps, in order. After each step,
start a scan to see if the scanner is working. If the problem continues, proceed with the
next step.
1.
A cable might be loose. Ensure that the USB, power, and TMA/ADF cables are
securely connected.
2.
Turn off the scanner, wait 60 seconds, and then turn on the scanner.
3.
Restart your computer.
4.
A software conflict might exist on your computer. You might need to uninstall and then
reinstall the HP scanning software.
a
. Click
Start
, click
Settings
, and then click
Control Panel
(in Windows XP and
Vista, click
Start
, and then click
Control Panel
).
b
. Click
Add or Remove Programs
(in Windows Vista, the
Programs and
Features
tool) and then select
HP Scanjet N6310 11.5
.
c
. Click
Remove
.
d
. Click
Add or Remove Programs
(in Windows Vista, the
Programs and
Features
tool) and then select the
HP Photosmart
software.
e
. Click
Remove
.
5.
Reinstall using the HP Scanning Software CD that came with your scanner. When
you insert the CD, an installation interface launches automatically. Choose the
software to install.
If the scanner still does not work, see
www.hp.com/support
or contact HP Customer
Support.
Additional troubleshooting information
If you have the HP scanning software installed, you can use the onscreen help to solve
other problems with the scanner. To gain access to the help, start the HP scanning
Scanner initialization or hardware problems
31
Инструкции и руководства похожие на HP Scanjet N6310
