Scanned images are not straight

When scanning with the automatic document feeder (ADF), make sure that the paper
guides touch the edges of the original. Make sure that all documents are of the same
width.
When scanning from the scanner glass, the item might have shifted when you closed the
lid. Straighten the original on the scanner glass, and then scan again.

See also

“Automatically straighten scanned images” on page 18

Clear a jam from the automatic document feeder (ADF)

To clear a jam from the automatic document feeder (ADF), follow these steps:

1.

Remove any loose pages from the ADF input tray.

2.

Open the ADF access door (1) and the roller cover (2) inside the ADF.

3.

Remove any jammed pages from inside the ADF.

Chapter 4

38

Troubleshooting