![background image](/i/hp/153813/hp-scanjet-n6310/h/hp-scanjet-n6310-009.png)
To change energy consumption settings, follow these steps:
1.
Press the
Setup
( ) button, use
and
until the energy consumption setting
you want is selected, and then press
OK
.
2.
Use
and
until the setting you want (
ON
or
OFF
) is selected, press
OK
, and
then press
twice.
NOTE:
Setting
Energy Savings
to
ON
reduces power to all parts of the scanner,
including the scanner lamp. As a result, setting
Instant Warm-up
to
OFF
when
Energy Savings
is set to
ON
has no effect.
Tools
This menu option starts the HP Scanner Tools Utility on the connected computer. This
utility allows you to associate any button-aware application with the
Scan
(
) or
Copy
(
) buttons and to monitor usage of certain scanner parts for maintenance
purposes.
NOTE:
You can also start the HP Scanner Tools Utility through the Windows
taskbar. To do so, click
Start
, point to
Programs
or
All Programs
, point to
HP
, point
to
Scanjet
, point to
HP Scanjet N6310
, and then click
Scanner Tools Utility
.
See also
•
“Control of the scanner buttons” on page 42
•
“HP Scanner Tools Utility scanner maintenance information” on page 24
Load originals
You can load your originals into your scanner using one of the following methods:
•
Use the automatic document feeder (ADF)
•
•
Use the transparent materials adapter (TMA)
Use the automatic document feeder (ADF)
For helpful information on loading your documents properly, refer to the following topics.
•
•
Document loading tips
•
The automatic document feeder (ADF) supports the following paper types.
Width:
148-216 mm (5.8-8.5 in)
Length:
148-356 mm (5.8-14 in)
Weight:
50-120 g/m
2
(13-32 lb)
Load originals
7