![background image](/i/zelmer/152583/zelmer-98682/h/zelmer-98682-070.png)
74
Dear Customer,
Congratulations on your choice of our appliance, and
welcome among the users of Zelmer products.
In order to achieve best possible results we recommend
using exclusively original Zelmer accessories. They have
been specially designed for this product.
Please read this instruction manual carefully. Pay special
attention to important safety instructions. Keep this instruction
manual for future reference.
Safety instructions and instructions
concerning the proper use of the appliance
Do not unplug by pulling on cord.
●
Plug the appliance only to a grounded 230 V electrical
●
outlet.
Do not operate the appliance if the cord, the housing or
●
the handle is visibly damaged. In such a case, return the
appliance to a service center.
If the non-detachable part of the cord is damaged,
it should be replaced by the producer or at a proper
service point or by a qualified person in order to avoid
any hazards.
The appliance can only be repaired by qualified service
personnel. Improper servicing may cause a serious
hazard to the user. In case of defects please contact
a qualified service center.
Unplug the appliance after operation. Put away the cord,
●
pushing it gently through the opening and place the plug
in the compartment.
Do not expose the mincer and the accessories to
●
temperatures above 60°C. It may cause damage to the
mincer.
Pay special attention while operating the appliance near
●
children.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
Turn off the device and unplug it from an outlet before
●
replacing the equipment or approaching moving parts
during use.
Always unplug the appliance before cleaning or changing
●
the accessories.
Use only the pusher to push food. Using objects other
●
than the pusher may cause damage to the mincer and
the motor.
Do not overload the appliance with too much product. Do
●
not push too hard with the pusher.
Carefully install the mincing unit, as improper installation
●
results in poor mincing quality and may cause the cutter
and the screen to become blunt. Replace a blunted
cutter or screen.
EN
Do not cover the ventilation openings in the housing
●
during operation.
Place the appliance only on a hard, stable surface.
●
Return the appliance to a service center if it fails to
●
switch on.
Separate the meat to be minced from bones, sinews,
●
gristles and strings.
Cut larger products into pieces before mincing.
●
Do not mince dry poppy seed. The poppy seed must be
●
scalded and soaked for several hours before mincing.
Do not immerse the motor in water, do not wash it under
●
running water.
Do not wash accessories installed on the motor unit.
●
Do not use abrasive detergents such as emulsions,
●
cream cleaners, polishes, etc. to clean the housing. They
may remove the graphic information symbols such as:
scales, marks, warning signs etc.
Use a soft brush to clean metal parts.
●
Do not wash metal parts in the dishwasher. Abrasive
detergents used in the dishwasher may cause these
parts to darken. Wash these parts manually using
traditional dishwashing liquids.
Technical parameters
The technical parameters are indicated on the rating label.
Permissible duration of uninterrupted operation 15 minutes.
Break before the next use
30 minutes.
Noise level (L
WA
)
77 dB/A.
The appliance features double electrical insulation (Class II)
and does not require grounding
.
ZELMER mincers fulfill the requirements of the existing
norms.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The appliance was marked by the CE sign on the rating
label.