Chapter 14 HTTP Redirect
ZyWALL 110/310/1100 Series User’s Guide
231
Figure 133
Configuration > Network > HTTP Redirect
The following table describes the labels in this screen.
14.2.1 The HTTP Redirect Edit Screen
Click Network > HTTP Redirect to open the HTTP Redirect screen. Then click
the Add or Edit
icon to open the HTTP Redirect Edit screen where you can configure the rule.
Figure 134
Network > HTTP Redirect > Edit
Table 85
Configuration > Network > HTTP Redirect
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove
To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific entry.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
Name
This is the descriptive name of a rule.
Interface
This is the interface on which the request must be received.
Proxy Server
This is the IP address of the proxy server.
Port
This is the service port number
used by the proxy server.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to return the screen to its last-saved settings.