Chapter 29 Services
ZyWALL 110/310/1100 Series User’s Guide
394
29.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or edit an existing
one. To access this screen, go to the Service Group screen (see
), and
click either the Add icon or an Edit icon.
Figure 259
Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Family
This field displays the Server Group supported type, which is according to your
configurations in the Service Group Add/Edit screen.
There are 3 types of families:
•
: Supports IPv4 only
•
: Supports IPv6 only
•
: Supports both IPv4 and IPv6
Name
This field displays the name of each service group.
By default, the ZyWALL uses services starting with “Default_Allow_” in the firewall rules to
allow certain services to connect to the ZyWALL.
Description
This field displays the description of each service group, if any.
Table 148
Configuration > Object > Service > Service Group (continued)
LABEL
DESCRIPTION
Table 149
Configuration > Object > Service > Service Group > Edit
LABEL
DESCRIPTION
Name
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Description
Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.