Chapter 37 System
ZyWALL 110/310/1100 Series User’s Guide
455
Figure 301
Configuration > System > DNS > MX Record Add
The following table describes the labels in this screen.
37.6.10 Adding a DNS Service Control Rule
Click the Add icon in the Service Control table to add a service control rule.
Figure 302
Configuration > System > DNS > Service Control Rule Add
The following table describes the labels in this screen.
Table 182
Configuration > System > DNS > MX Record Add
LABEL
DESCRIPTION
Domain Name
Enter the domain name where the mail is destined for.
IP Address/FQDN
Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that
handles the mail for the domain specified in the field above.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving
Table 183
Configuration > System > DNS > Service Control Rule Add
LABEL
DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object
Select ALL to allow or deny any computer to send DNS queries to the ZyWALL.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to send DNS queries to the ZyWALL.
Zone
Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed or denied.
Action
Select Accept to have the ZyWALL allow the DNS queries from the specified computer.
Select Deny to have the ZyWALL reject the DNS queries from the specified computer.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving