Chapter 4 Quick Setup Wizards
ZyWALL 110/310/1100 Series User’s Guide
48
The following table describes the labels in this screen.
4.3 VPN Setup Wizard
Click VPN Setup in the main Quick Setup screen to open the VPN Setup Wizard Welcome screen.
Figure 29
VPN Setup Wizard
4.3.1 Welcome
Use wizards to create Virtual Private Network (VPN) rules. After you complete the wizard, the Phase
1 rule settings appear in the VPN > IPSec VPN > VPN Gateway screen and the Phase 2 rule
settings appear in the VPN > IPSec VPN > VPN Connection screen.
Table 13
Interface Wizard: Summary WAN
LABEL
DESCRIPTION
Encapsulation
This displays what encapsulation this interface uses to connect to the Internet.
Service Name
This field only appears for a PPPoE interface. It displays the PPPoE service name specified
in the ISP account.
Server IP
This field only appears for a PPTP interface. It displays the IP address of the PPTP server.
User Name
This is the user name given to you by your ISP.
Nailed-Up If
No displays the connection will not time out. Yes means the ZyWALL uses the idle
timeout.
Idle Timeout
This is how many seconds the connection can be idle before the router automatically
disconnects from the PPPoE server. 0 means no timeout.
Connection ID
If you specified a connection ID, it displays here.
WAN Interface
This identifies the interface you configure to connect with your ISP.
Zone
This field displays to which security zone this interface and Internet connection will belong.
IP Address
Assignment
This field displays whether the WAN IP address is static or dynamic (Auto).
First DNS Server
Second DNS
Server
If the IP Address Assignment is Static, these fields display the DNS server IP
address(es).
Close
Click Close to exit the wizard.