Chapter 20 IPSec VPN
ZyWALL 110/310/1100 Series User’s Guide
295
Figure 181
Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
20.3.1 The VPN Gateway Add/Edit Screen
The VPN Gateway Add/Edit screen allows you to create a new VPN gateway policy or edit an
existing one. To access this screen, go to the VPN Gateway summary screen (see
), and click either the Add icon or an Edit icon.
Table 109
Configuration > VPN > IPSec VPN > VPN Gateway
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove
To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Object References
Select an entry and click Object References to open a screen that shows which settings
use the entry. See
for an example.
#
This field is a sequential value, and it is not associated with a specific VPN gateway.
Status
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
Name
This field displays the name of the VPN gateway
My address
This field displays the interface or a domain name the ZyWALL uses for the VPN gateway.
Secure Gateway
This field displays the IP address(es) of the remote IPSec routers.
VPN Connection
This field displays VPN connections that use this VPN gateway.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to return the screen to its last-saved settings.