Chapter 6 Monitor
ZyWALL 110/310/1100 Series User’s Guide
97
6.11 The IPSec Monitor Screen
You can use the IPSec Monitor screen to display and to manage active IPSec To access this
screen, click Monitor > VPN Monitor > IPSec. The following screen appears. SAs. Click a
column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell again
to reverse the sort order.
Figure 69
Monitor > VPN Monitor > IPSec
Status
Ready - you can have the ZyWALL use the USB storage device.
Click Remove Now to stop the ZyWALL from using the USB storage device so you
can remove it.
Unused - the connected USB storage device was manually unmounted by using
the Remove Now button or for some reason the ZyWALL cannot mount it.
Click Use It to have the ZyWALL mount a connected USB storage device. This
button is grayed out if the file system is not supported (unknown) by the ZyWALL.
none - no USB storage device is connected.
Detail
This field displays any other information the ZyWALL retrieves from the USB
storage device.
Deactivated - the use of a USB storage device is disabled (turned off) on the
ZyWALL.
OutofSpace - the available disk space is less than the disk space full threshold
(see
for how to configure this threshold).
Mounting - the ZyWALL is mounting the USB storage device.
Removing - the ZyWALL is unmounting the USB storage device.
none - the USB device is operating normally or not connected.
Table 32
Monitor > System Status > USB Storage (continued)
LABEL
DESCRIPTION