Chapter 34 ISP Accounts
ZyWALL 110/310/1100 Series User’s Guide
430
34.2.1 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See
.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 283
Configuration > Object > ISP Account > Edit
The following table describes the labels in this screen.
Profile Name
This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
Protocol
This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name
This field displays the user name of the ISP account.
Table 166
Configuration > Object > ISP Account (continued)
LABEL
DESCRIPTION
Table 167
Configuration > Object > ISP Account > Edit
LABEL
DESCRIPTION
Profile Name
This field is read-only if you are editing an existing account. Type in the profile name of the
ISP account. The profile name is used to refer to the ISP account. You may use 1-31
alphanumeric characters, underscores(
_
), or dashes (-), but the first character cannot be
a number. This value is case-sensitive.
Protocol
This field is read-only if you are editing an existing account. Select the protocol used by
the ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.