Chapter 1 Introduction
ZyWALL 110/310/1100 Series User’s Guide
26
Configuration Menu
Use the configuration menu screens to configure the ZyWALL’s features.
Cellular Status
Displays details about the ZyWALL’s 3G connection status.
USB Storage
Displays details about USB device connected to the ZyWALL.
VPN Monitor
IPSec
Displays and manages the active IPSec SAs.
SSL
Lists users currently logged into the VPN SSL client portal. You can also log
out individual users and delete related session information.
L2TP over
IPSec
Displays details about current L2TP sessions.
Log
Lists log entries.
Table 7
Configuration Menu Screens Summary
FOLDER OR LINK TAB
FUNCTION
Quick Setup
Quickly configure WAN interfaces or VPN connections.
Network
Interface
Port Role
Use this screen to set the ZyWALL’s flexible ports as LAN1, WLAN,
or DMZ.
Ethernet
Manage Ethernet interfaces and virtual Ethernet interfaces.
PPP
Create and manage PPPoE and PPTP interfaces.
Cellular
Configure a cellular Internet connection for an installed 3G card.
Tunnel
Configure tunneling between IPv4 and IPv6 networks.
VLAN
Create and manage VLAN interfaces and virtual VLAN interfaces.
Bridge
Create and manage bridges and virtual bridge interfaces.
Trunk
Create and manage trunks (groups of interfaces) for load
balancing.
Routing
Policy Route
Create and manage routing policies.
Static Route
Create and manage IP static routing information.
RIP
Configure device-level RIP settings.
OSPF
Configure device-level OSPF settings, including areas and virtual
links.
Zone
Configure zones used to define various policies.
DDNS
DDNS
Define and manage the ZyWALL’s DDNS domain names.
NAT
Set up and manage port forwarding rules.
HTTP Redirect
Set up and manage HTTP redirection rules.
ALG
Configure SIP, H.323, and FTP pass-through settings.
IP/MAC
Binding
Summary
Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List
Configure ranges of IP addresses to which the ZyWALL does not
apply IP/MAC binding.
DNS Inbound
LB
DNS Load
Balancing
Configure DNS Load Balancing.
Auth. Policy
Define rules to force user authentication.
Table 6
Monitor Menu Screens Summary (continued)
FOLDER OR LINK
TAB
FUNCTION