Chapter 30 Schedules
ZyWALL 110/310/1100 Series User’s Guide
398
30.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
click either the Add icon or an Edit icon in the One Time section.
Figure 261
Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 151
Configuration > Object > Schedule > Edit (One Time)
LABEL
DESCRIPTION
Configuration
Name
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the first character cannot be a number.
This value is case-sensitive.
Date Time
StartDate
Specify the year, month, and day when the schedule begins.
•
Year - 1900 - 2999
•
Month - 1 - 12
•
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StartTime
Specify the hour and minute when the schedule begins.
•
Hour - 0 - 23
•
Minute - 0 - 59
StopDate
Specify the year, month, and day when the schedule ends.
•
Year - 1900 - 2999
•
Month - 1 - 12
•
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StopTime
Specify the hour and minute when the schedule ends.
•
Hour - 0 - 23
•
Minute - 0 - 59
OK
Click OK to
save your changes back to the ZyWALL.
Cancel
Click Cancel to exit this screen without saving your changes.