Chapter 6 Monitor
ZyWALL 110/310/1100 Series User’s Guide
86
6.4 The Traffic Statistics Screen
Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This
screen provides basic information about the following for example:
• Most-visited Web sites and the number of times each one was visited. This count may not be
accurate in some cases because the ZyWALL counts HTTP GET packets. Please see
for more information.
• Most-used protocols or service ports and the amount of traffic on each one
IP Address
This field displays the current IPv6 address assigned to the interface. If the IPv6 address is
not displayed, the interface is disabled or did not receive an IPv6 address via DHCP.
If this interface is a member of an active virtual router, this field displays the IP address it
is currently using. This is either the static IP address of the interface (if it is the master) or
the management IP address (if it is a backup).
IP Assignment
This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Services
This field lists which services the interface provides to the network. Examples include
DHCP relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a if the interface
does not provide any services to the network.
Action
Use this field to get or to update the IP address for the interface. Click Renew to send a
new DHCP request to a DHCP server. Click Connect to try to connect a PPPoE/PPTP
interface. If the interface cannot use one of these ways to get or to update its IP address,
this field displays n/a.
Interface
Statistics
This table provides packet statistics for each interface.
Refresh
Click this button to update the information in the screen.
Expand/Close
Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.
Name
This field displays the name of each interface. If there is a Expand icon (plus-sign) next to
the name, click this to look at the statistics for virtual interfaces on top of this interface.
Status
This field displays the current status of the interface.
Down - The interface is not connected.
Speed / Duplex - The interface is connected. This field displays the port speed and
duplex setting (Full or Half).
This field displays Connected and the accumulated connection time (hh:mm:ss) when the
PPP interface is connected.
TxPkts
This field displays the number of packets transmitted from the ZyWALL on the interface
since it was last connected.
RxPkts
This field displays the number of packets received by the ZyWALL on the interface since it
was last connected.
Tx B/s
This field displays the transmission speed, in bytes per second, on the interface in the one-
second interval before the screen updated.
Rx B/s
This field displays the reception speed, in bytes per second, on the interface in the one-
second interval before the screen updated.
Table 23
Monitor > System Status > Interface Status (continued)
LABEL
DESCRIPTION