Chapter 3 Hardware Introduction
ZyWALL 110/310/1100 Series User’s Guide
41
3.5.1 Rear Panels
The following graphic shows the rear panel of the ZyWALL.
Table 11
Rear Panel
LABEL
DESCRIPTION
Console
You can use the console port to manage the ZyWALL using CLI commands. You will be
prompted to enter your user name and password. See the Command Reference Guide for
more information about the CLI.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
•
Speed 115200 bps
•
Data Bits 8
•
Parity None
•
Stop Bit 1
•
Flow Control Off
CF Card Slot
Insert a compact flash card into this slot to store ZyWALL system logs.
Power
Use the included power cord to connect the power socket to a power outlet. Turn the power
switch on if your ZyWALL has a power switch.
Lock
Attach a lock-and-cable from the Kensington lock (the small, metal-reinforced, oval hole)
to a permanent object, such as a pole, to secure the ZyWALL in place.
Fan
The fans are for cooling the ZyWALL. Make sure they are not obstructed to allow maximum
ventilation.
110
310
1100