BenQ DC 5530  User’s Manual

Preparing your DC C60 for using

6

Eng
lish

2.5. Attaching the Strap: 

 Note

• 

If the camera is powered-on without the card, the 

"

NO  CARD

"

message appears on the LCD monitor.

• 

To prevent valuable data from being accidentally 

erased from an SD Memory Card you can slide the 

write-protected tab (on the side of the SD Memory 

Card) to

 "

LOCK

"

.

• 

To save, edit or erase data on an SD Memory Card, 
you must unlock the card.

• 

MMC Card can not be accepted to use.

• 

Please format an SD Memory Card by this camera before use.

To prevent accidental slippage during the use, always use the strap. 
Attach the hand strap as follows:
1.

Thread the small loop of the hand strap through 

the strap eyelet on the camera.

2.

Pull the large loop through the small loop until the 

strap is firmly secured.

Write-protect tab

Write-protection state