BenQ DC 5530  User’s Manual

Using the DC C60

24

Eng
lish

1. Set the mode dial to [ AV ] and press the [

]  button.

2. Set the aperture value with the command dial.

• 

 Turn the command dial to the 

 side to increase the 

value. 

• 

 Turn the command dial to the 

 side to decrease the 

value.

• 

 The setting range is as follows.

      F6.7/F5.6/F 4.8/F4.0/F3.5/F2.8

• 

 The aperture and corresponding shutter speed are dis-

played on the screen. If an appropriate combination 
cannot be set, the shutter speed value is displayed in red, 
but photographs can be taken.halfway, then press it 
down fully.

3. Compose the picture, press the shutter button down 

halfway, then press it down fully.

3.5. Full Manual Mode 

[ M ]

This mode can set the aperture and shutter speed values separately before taking a 

photograph. Both the aperture value and shutter speed can be changed by rotating the 
Command dial.

1. Set the mode dial to [ M ].
2. Select the shutter speed or the aperture with the  

[

]  button.

3. Set the shutter speed or the aperture value with the 

command dial.

4. Compose the picture, press the shutter button down 

halfway, then press it down fully.

 Note

• 

The aperture value is adjusted automatically depending on the position of the 
zoom lens.