BenQ DC 5530 User’s Manual
Using the DC C60
9
Eng
lish
3.1.2. Using the Optical Zoom
The lens moves during the zoom photography. Zoom photography allows you to take
telephoto and wide-angle shots. The subject appears closer by pressing the [
] button and
appears farther away by pressing the [
] button.
3.1.3. Using the Digital Zoom
By using the digital zoom, images can be enlarged so that the subject appears closer. However,
the more the image is enlarged, the grainer the image will become. The digital zoom function
is only available when you set the LCD monitor and the digital zoom to ON. To capture a
digitally zoomed image, perform the following steps:
1.
Set the mode dial to one of [
], [
P
], [
TV
],
[
AV
], [
M
], [
], [
], [
] , [
] and
power on the camera.
2.
If required,turn on the LCD monitor by pressing
the [
]button.
3.
Compose the picture by using the [
]/[
]
button.
•
Pressing the [
]button zooms in on the
subject, and enlarges the subject on the LCD
monitor.
•
Pressing the [
]button provides a wider angle
picture.The lens position moves according to the
zoom button setting.
4.
Press the shutter button down halfway, then press
it down fully.
1.
Set the mode dial to one of [
], [
P
], [
TV
], [
AV
],
[
M
], [
], [
], [
] , [
] and power on the
camera.
2.
If required,turn on the LCD monitor by pressing the
[
] button.
3.
To enable the digital zoom is as follows:
a.
Press the
MENU
button.
b.
Press the
or
button to select Function page.
c.
Press the
or
button to select Digital Zoom, and
press the
SET
button.
d.
Press the
or
button again to select ON, and press
the
SET
button.
e.
Press the
MENU
button.
f.
To activate the digital zoom, press the [
] button
completely and hold it until the image on the LCD
monitor expands.
4.Press the shutter button to capture a “zoomed” image.
