![background image](/i/bmw/160195/bmw-c1-2001/h/bmw-c1-2001-171.png)
17.15
Draining coolant from return line
–
Remove left service cover
a
....................................................See Group 46
•
Disconnect spark plug cap
•
Remove bracket (2) for ignition cable
•
Detach bracket (5) for seat-belt central release
cable from moulded hose
•
Remove moulded return hose (4) from
bracket (3)
•
Release hose clamps (1) with pliers,
BMW No. 17 5 500
•
Disconnect moulded hose (4) from coolant pipe
When installing:
•
Installation is the reverse of the removal proce-
dure
•
Do not reinstall moulded return hose (4) in
bracket (3) until system has been refilled with
coolant
Draining coolant from expansion tank
–
Removing and installing expansion tank
L
Note:
Remember to drain coolant from the vapour dis-
charge hose as well!
Adding coolant
Add coolant to feed and return lines and engine
•
and install custom-moulded return hose on cool-
ant pipe as necessary
L
Note:
Install new seal ring on drain plug!
•
Tighten drain plug
•
Pour the coolant into the refill reservoir until bub-
ble-free coolant escapes from the vent screw on
the engine
•
Tighten engine vent screw
•
Top up coolant until level reaches bottom (arrow)
of refill reservoir
X
Torque specification:
Drain plug .................................................... 10 Nm
Vent screw ..................................................... 9 Nm
C1170181
3
5
4
1
17 5 500
2
C1170150