![background image](/i/bmw/160195/bmw-c1-2001/h/bmw-c1-2001-282.png)
34.14
34 52 111
Removing and installing rear
ABS sensor
e
Attention:
Disconnect earth cable from battery and insulate it!
–
Open the seat
a
....................................................See Group 52
•
Open cable tie for ABS sensor cable (arrow)
•
Disconnect plug (1)
•
Release wire tie from ABS sensor wire (arrows)
•
Open cable clip (1)
•
Remove fastener (1) for ABS sensor
When installing:
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
e
Attention:
Install the ABS sensor wire carefully and secure it
with cable ties!
e
Attention:
When installing a new ABS sensor, always check
the sensor gap!
–
Check the ABS sensor gap and adjust if neces-
sary (
X
Torque specification:
ABS sensor attachment ................................. 9 Nm
Adjustment data:
ABS sensor gap ..................min 0.3 mm (0.0118 in)
C1340100
1
C1340111
1
C1340121
1