![background image](/i/bmw/160195/bmw-c1-2001/h/bmw-c1-2001-281.png)
34.13
•
Release ABS sensor (arrow) (1) attachment
•
Remove ABS sensor (1)
When installing:
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
e
Attention:
Install the ABS sensor wire carefully and secure it
with cable ties!
e
Attention:
When installing a new ABS sensor, always check
the sensor gap!
–
Check the ABS sensor gap and adjust if neces-
sary (
X
Torque specification:
ABS sensor attachment ................................. 9 Nm
Adjustment data:
ABS sensor gap ..................min 0.3 mm (0.0118 in)
34 51 100
Replacing front ABS reluctor
–
Remove front wheel
a
....................................................See Group 36
•
Remove 5 fasteners (arrows) securing the ABS
reluctor
•
Remove the ABS reluctor
When installing:
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
•
Check the ABS sensor gap and adjust if neces-
sary
X
Torque specification:
ABS reluctor attachment ................................ 5 Nm
C1310010
1
C1340050