![background image](/i/bmw/160195/bmw-c1-2001/h/bmw-c1-2001-230.png)
31.10
Installing ball bearing and stud
L
Note:
Always fit new bearing when reinstalling!
•
Press in ball bearing (6) against its seat in the fork
cross brace with drift punch,
BMW No. 31 6 531
•
Press ball bearing (6) onto threaded stud (8) us-
ing drift punch,
BMW No. 31 6 532,
and
sleeve,
BMW No. 31 6 533
•
Install spacer sleeve (7) and pre-assembled
threaded stud (8) in fork cross brace with drift
punch,
BMW No. 31 6 532,
and sleeve,
BMW No. 31 6 533
•
Install circlip (5)
Installing fork cross brace
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
•
Remove all traces of old thread-locking com-
pound from the threads
X
Torque specification:
Fork cross brace to frame (threaded stud)
(+ Loctite 243) .............................................. 83 Nm
31 6 531
6
C1310130
31 6 532
31 6 533
6
C1310140
8
31 6 532
C1310150
31 6 533