328
Copying
Setting Copy Options
Set the following options for the current copy job before tapping
Copy
to begin copying.
For details about making copies, see "Making Copies From the Document Glass" and "Making Copies From the
DADF."
NOTE:
The copy options automatically return to their default status after the auto clear timer is expired.
Options on each tile are below:
• Copy tile
–
Quantity
–
Darken / Lighten
–
Output Color
–
Select Tray
–
2 Sided Copying
–
Sharpness
–
Reduce / Enlarge
–
Original Size
–
Original Type
–
Collation
–
2-Up
–
Color Saturation
–
Margin
–
Auto Exposure
Quantity
To specify the number of copies from 1 to 99.
1
Tap – or + to specify the number of copies.
Darken / Lighten
To adjust the contrast to make the copy darker or lighter than the original:
1
Tap
Darken/Lighten
.
2
Drag the desired level on the
Darken/Lighten
bar, and then tap
OK
.
You can select a contrast level from seven levels between
Darken
and
Lighten
.
Drag the indicator on the left side of the bar makes the document contrast lighter, and selecting a cell on the right
side of the bar makes the document contrast darker.
* Denotes the factory default setting.
Darken 3
Works well with light documents or faint pencil markings.
Darken 2
Darken 1
Normal*
Works well with normal typed or printed documents.
Lighten 1
Works well with dark documents.
Lighten 2
Lighten 3