Faxing
373
NOTE:
Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must
do the following from the operator panel.
1
Press the
(Information)
button.
2
Tap the
Tools
tab, and then tap
Admin Settings
.
3
Tap
Fax Settings
.
4
Tap
Fax Line Settings
.
5
Tap
Line Type
.
6
Tap
PBX
, and then
OK
.
7
Tap
Transmission Defaults
.
8
Tap
Prefix Dial
.
9
Tap
On
.
Tone/Pulse
You can select the dialing type.
• Tone
•
Pulse(10PPS)
•
Pulse(20PPS)
Prefix Dial
You can specify whether or not to set a prefix dial number. When
you set
Prefix Dial
to
On
, the number set in
Prefix
Dial Number
dials before any auto dial number is started. It is
useful for accessing the Private Automatic Branch Exchange
(PBX). You can set a prefix dial number of up to five digits.
Fax Cover Page
You can set whether to attach a cover page to faxes when sending
faxes.
Fax Header
Prints the sender’s information on the header of faxes.
Tap
Off
to turn this feature off.
Tap
On
to turn this feature on.
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed to
On and cannot be changed.
For information on the country setting, see "Setting Your
ECM
You can set whether to enable or disable the ECM (Error
Correction Mode).
Modem Speed
You can set the modem speed.
Display Manual
Fax Recipients
You can set whether to display the fax number of the recipient on
the
Sending Fax
screen when manually sending a fax.
Fax Reports
Fax Activity
You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
Fax Transmit
You can set whether to print a transmission result after a fax
transmission.
Fax Broadcast
You can set whether to print a transmission result after a fax
transmission to multiple locations.
Fax Protocol
You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
Option
Description