39
O
ver
view
Basic Oper
ation
Adv
. 1 (K
it)
Adv
. 2 (P
hr
ase)
Adv
. 3 (
O
ther)
A
ppendix
The onboard effects processor, “FX” , has 30 different effects to choose from.
FX Settings (FX)
Switching the FX Type (FX-TYPE)
Here’s how to switch the FX type.
1.
Choose MENU
Ú
FX
Ú
TYPE (p . 16) .
The FX-TYPE screen appears.
Pads for which FX is enabled
FX type
[Knob 3] (TYPE) displays a list of FX types.
[Button 3] (BYPASS) temporarily turns FX off.
A diagram of the
selected FX type is
shown.
2.
Turn [Knob 3] (–/+) to select an FX type .
3.
Press [Button 3] (OK) to confirm .
Parameter
Value
Explanation
FX Type
00(THRU)–30
FX type. If you select “00(THRU),” FX will not be applied.
Editing FX Parameters (FX-EDIT)
Here’s how to edit the parameters of each FX.
1.
Choose MENU
Ú
FX
Ú
The FX-EDIT screen appears.
Pads for which FX is enabled
[Knob 3] (–/+) edits the value.
[Button 3] (BYPASS) temporarily turns FX off.
[Knob 1] (SEL) selects
a parameter.
FX type
2.
Turn [Knob 1] (SEL) to select a parameter .
3.
Turn [Knob 3] (–/+) to edit the value .
•
The parameters will differ depending on the FX.
•
Parameters for which the following icons are shown can be controlled using the knobs in the FX CONTROL screen (p. 41).
Knob 1
Knob 2
Knob 3
Using the Effects (FX)
