33
O
ver
view
Basic Oper
ation
Adv
. 1 (K
it)
Adv
. 2 (P
hr
ase)
Adv
. 3 (
O
ther)
A
ppendix
HH CTRL setting examples
If a hi-hat control pedal is connected
Choose “PEDAL” for the pad that’s assigned to the hi-hat Inst.
Set to “PEDAL”
If a hi-hat control pedal is not connected
Make the following settings if you want to assign the closed hi-hat and open hi-hat sounds to two different pads.
Set Inst A to “CLOSE”
Set Inst A to “OPEN”
If you want to use one pad to play both the closed hi-hat , and be able to switch to the open hi-hat, choose the same hi-hat Inst for both
Inst A and B of a single pad, set “Inst Layer Type” (p. 30) to “SWITCH,” and set HH CTRL as follows. Use the “Layer Point” (p. 30) setting to specify
the dynamic level at which the hi-hat will open.
Set Inst A to “CLOSE”
Set Inst B to “OPEN”
Volume
Playing
Dynamics
INST Screen QUICK MENU
From the INST screen, press the [QUICK] button to access the following QUICK MENU.
Menu
Explanation
Page
Copy Pad
Copy pad settings.
Paste Pad
Paste pad settings.
Pad Exchange
Access the Pad Exchange screen where you can exchange pads.
Multi Edit
Access the MULTI EDIT screen where you can edit the tuning and volume of each pad.
Kit Protect ON/OFF
Switch the kit protect setting on/off.
