Chapter 4 Network Setting
NWA1300-NJ User’s Guide
33
4.3 LINK
Use this screen to change your IP settings. The NWA1300-NJ’s Ethernet port is set
to DHCP client mode by default. Click NETWORK SETTING > LINK.
Figure 6
NETWORK SETTING > LINK
The following table describes the labels in this screen.
Table 4
NETWORK SETTING > LINK
LABEL
DESCRIPTION
DHCP Client
Select this option if your NWA1300-NJ is using a dynamically assigned
IP address from a DHCP server each time.
Note: You must know the IP address assigned to the NWA1300-
NJ (by the DHCP server) to access the NWA1300-NJ again.
MTU Setting
Enter the MTU (Maximum Transmission Unit) size for the Ethernet
interface.
Static IP
Select this option if you were assigned a fixed IP address (and DNS
server settings) to use for Internet access
IP Address
Enter the IP address of your NWA1300-NJ in dotted decimal notation.
Note: If you change the NWA1300-NJ's IP address, you must use
the new IP address if you want to access the web
configurator again.
Subnet Mask
Enter the subnet mask that specifies the network number portion of an
IP address.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
