Chapter 6 Administration
NWA1300-NJ User’s Guide
49
To change your NWA1300-NJ’s FTP settings, click ADMINISTRATION > FTP. The
screen appears as shown. Use this screen to specify from which IP address the
access can come.
Figure 12
ADMINISTRATION > FTP
The following table describes the labels in this screen.
6.4 FIRMWARE
There are two ways to upgrade firmware to the NWA1300-NJ: manually or
scheduled.
To manually upgrade the firmware, you have to download the latest firmware first
from
www.zyxel.com
and then upload it to the NWA1300-NJ. You can upload it to
the NWA1300-NJ using the Web Configurator or using a TFTP server.
With scheduled firmware upgrade, you need to set up a TFTP server where the
NWA1300-NJ can automatically download the latest firmware at the specified
time.
Table 10
ADMINISTRATION > FTP
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed,
however you must use the same port number in order to use FTP to
access the NWA1300-NJ.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the NWA1300-NJ using this service.
Select All to allow any computer to access the NWA1300-NJ using FTP.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA1300-NJ using FTP.
Reset
Click Reset to reload the default configuration for this screen.
Apply
Click Apply to save your changes back to the NWA1300-NJ.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
