NWA1300-NJ User’s Guide
69
C
H A P T E R
8
Troubleshooting
8.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
•
•
8.2 Power, Hardware Connections, and LEDs
The NWA1300-NJ does not turn on. None of the LEDs turn on.
1
Make sure the NWA1300-NJ is connected to a PoE switch.
2
Make sure the PoE switch is connected to an appropriate power source and the
power source is turned on.
3
Disconnect and re-connect the Ethernet cable between the NWA1300-NJ and the
PoE switch.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See