![background image](/i/zyxel/153773/zyxel-omninet-lcd/h/zyxel-omninet-lcd-140.png)
Technical Reference for ZyXEL omni.net series
A-6
All the Following Commands Require a 'AT' Prefix
AT Com.
Options
Function & Description
Reference
CS
n
n=0-3
(0 *)
Suspend a call, 'n' is the call identifier (DSS1).
CT
Clear buffer and start the embedded protocol analyzer. Capture data
immediately and start timer.
C$
Invoke the interpretation function of the embedded protocol analyzer
and display the results on DTE.
D
s
Dial 's' (numbers and options) that follows (see also S38b0, S35b4).
The options for 's' are listed as follows:
,
Pause for a time specified in S8. Remaining digits will be dialed as
in-band DTMF.
Y0 (*)
Unknown type of number
Y1
International
number
Y2
National
number
Y3
Network
specific
number
Y4
Subscriber
number
Y6
Abbreviated
number
Z0 (*)
Type of sub-address - NSAP with AFI=$50,
IA5 characters
Z2
Type of sub-address - user specified, IA5 characters
N0 (*)
Unknown numbering plan
N1
ISDN/Telephony numbering plan (CCITT E.164/E.163)
N3
Data numbering plan (CCITT X.121)
N8
National standard numbering plan
N9
Private numbering plan
/
Called party sub-address delimiters
The format of 's' is:
[[Yn][Nn]called_party_number][[W][,]]inband_dtmf_number
or
[[Yn][Nn]called_party_number][/[Zn]called_party_subaddress/]
DA
s
Dial 's' (number and options) that follows for the POTS port, Phone
1.
DB
s
Dial 's' (number and options) that follows for the POTS port, Phone
2.