Technical Reference for ZyXEL omni.net series
4-9
If an incoming SETUP message is offered with addressing information (i.e. the appropriate part of
the called_party_number), this address will be compared with the MSN numbers assigned by the
[
AT&ZIn=s
] commands. The call will be accepted using the specific protocol, if the assigned
number of this protocol matches the received called party number.
NOTE:
You are not required to enter the complete number string for
the [AT&Zin] command. The last few distinguishable digits will be
enough for the Omni.net to make the decision. Two phone number
strings are said to be matched if their least significant 'n' digit(s) are
identical, where 'n' is the number of digits in the shorter string.
Called_Party_Subaddress information within the incoming SETUP message can also be used to
select the protocols and/or analog ports. In normal conditions Called_Party_Subaddress
information is not used by the omni.net to select the protocols or services, but only indicates the
subaddress (if any) to the DTE.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
