Prestige 2000W User’s Guide
Chapter 12 User Web Configurator Screens
71
Figure 15
DHCP Network Configuration
Table 8
DHCP
LABEL
DESCRIPTION
Get IP Address
Network Mode
Click
STATIC
to manually enter a fixed IP address.
Click
DHCP
to have the Prestige automatically obtain network settings at startup
from a Dynamic Host Configuration Protocol server. These settings are not
configurable.
Click
PPPoE
if your ISP uses Point-to-Point Protocol over Ethernet.
Network IP
This is the IP address your Prestige uses to connect to the wireless LAN.
Network Subnet
Mask
The subnet mask specifies the network number portion of an IP address.
Default Gateway This field displays the gateway IP address for your Prestige to connect.
MAC Address
Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
This field is read only and cannot be configured.
DNS Server IP
Type the DNS’ IP address for translating readable domain names into valid
computer IP addresses.
Second DNS
Server IP
Type a backup DNS IP address for the Prestige to use in the event that the Prestige
cannot connect to the preferred DNS.
APPLY
Click
APPLY
to save your changes without restarting the Prestige. Your wireless
LAN, Internet and SIP settings changes do not take affect until you use
RESTART
(in the navigation panel).
CANCEL
Click
CANCEL
to begin configuring this screen afresh.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
