![background image](/i/zyxel/145144/zyxel-p-2000w-ee/h/zyxel-p-2000w-ee-084.png)
Prestige 2000W User’s Guide
84
Chapter 12 User Web Configurator Screens
12.13 SIP Configuration
Your Prestige is a SIP client and must connect to a SIP server. The SIP proxy server receives
your Prestige’s SIP requests and forwards them to the next SIP server in the network.
Figure 30
SIP
STUN Server IP
Type the IP address or domain name of the STUN server in the first field. You can
use up to 127 ASCII characters.
Enter the STUN server’s listening port for STUN requests in the second field.
Leave this field set to the default if your VoIP service provider did not give you a
server port number for STUN.
STUN
Interval(sec.)
Type how often the Prestige should check the STUN server to determine the
correct public IP address to use.
Fake WAN Address on SIP and RTP
WAN IP Address
Enter the NAT router’s public IP address or domain name (up to 127 ASCII
characters) in this field.
WAN SIP Port
Enter the port number that your SIP sessions use with the public IP address of the
NAT router.
APPLY
Click
APPLY
to save your changes without restarting the Prestige. Your wireless
LAN, Internet and SIP settings changes do not take affect until you use
RESTART
(in the navigation panel).
CANCEL
Click
CANCEL
to begin configuring this screen afresh.
Table 11
NAT Traversal Configuration (continued)
LABEL
DESCRIPTION
Table 12
SIP
LABEL
DESCRIPTION
SIP PROXY
Proxy IP Address
This field displays the IP address or domain name of your SIP proxy
server.
User Account
Registrar Username
This field displays the username as supplied by your VoIP provider to
access the SIP server.