Chapter 1 Introduction
ZyWALL USG 20-2000 User’s Guide
25
2
Open the transceiver’s latch (latch styles vary).
3
Pull the transceiver out of the slot.
1.8.2 Maximizing Throughput
A ZyWALL USG with dual internal buses (see
) for Gigabit interfaces has one
internal bus for ports
P1
-
P7
and another for port
P8
. To maximize the ZyWALL’s throughput, use
P8
for your connection with the most traffic.
Figure 19
Gigabit Interfaces and Internal Buses
Some ZyWALLs (see
) let you add an optional Security Extension Module (SEM) to
enhance the VPN or VPN and Unified Threat Management (UTM) capabilities.
Figure 20
Security Extension Module
• The VPN module (SEM-VPN) increases the maximum VPN throughput from 100 Mbps to 500
Mbps, the maximum number of IPSec VPN tunnels from 1,000 to 2,000 and the maximum
number of SSL VPN users from 250 (with a license) to 750 (with a license).
• The SEM-DUAL module provides the VPN performance enhancements and increases the
maximum anti-virus and IDP traffic throughput from 100 Mbps to 400 Mbps.
1.8.3 Front Panel LEDs
The following tables describe the LEDs.
Table 8
ZyWALL USG 20 ~ USG 1000 Front Panel LEDs
LED
COLOR
STATUS
DESCRIPTION
PWR
Off
The ZyWALL is turned off.
Green
On
The ZyWALL is turned on.
Red
On
There is a hardware component failure. Shut down the device, wait for a few
minutes and then restart the device (see
). If the LED
turns red again, then please contact your vendor.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
