Installing and Removing the Battery
12
The remaining battery power is displayed when you turn the transmitter on. A blinking battery
icon (
) indicates that the battery will be depleted soon.
Number of images that can be transferred
Approx. number of images
When using a fully charged LP-E6. The number of images that can be transferred is nearly
the same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).
When automatic transfer is performed during shooting of an image of approx. 5 MB under
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
Fewer images can be transferred when transferring images continuously over a wireless
LAN.
1
Open the cover.
Push the lever down and open the cover.
2
Remove the battery.
Press the battery lock lever in the direction of the
arrow to unlock, and then remove the battery.
To prevent a short-circuit, be sure to always attach
the protective cover to the battery.
Battery check
Icon
Level (%)
100 – 70
69 – 50
49 – 20
19 – 10
9 – 1
0
LAN
At Normal Temperature (23°C / 73°F)
At Low Temperature (0°C / 32°F)
Wireless LAN
2400
2300
Wired LAN
2200
2200
Removing the battery
COP
Y
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
