95

Connecting GPS Devices via Bluetooth

4

When the confirmation message is 
displayed, select [OK].

The GPS connection status changes to 
[

Connected

]. Pressing <

0

> under these 

conditions will enable you to disconnect the GPS 
device.

While the Bluetooth connection is active, <

s

> is 

displayed on the transmitter’s LCD panel and 
<

r

> is displayed on the camera’s LCD panel. 

5

Confirm operation of the GPS device.

Make sure the GPS device has determined the 
current location.

6

Take the picture.

After confirming that <

r

> is shown on the 

camera’s LCD panel, shoot when ready.

If the <

r

> icon is blinking when you shoot, 

accurate GPS data will not be added to images.

7

Check the GPS data.

Play back the image in single image display.

Press the <

6

> button to display the shooting 

information screen with GPS data.

From top to bottom: latitude, longitude,
altitude, and Coordinated Universal Time

When the camera’s power is turned off and on or when it wakes up from auto power off, do not shoot 
until the <

r

> icon remains displayed. If you shoot while the icon is blinking, the correct GPS 

information may not be added to images.

The date and time indicated is the Coordinated Universal Time (UTC) as obtained by the GPS device, 
which is nearly the same as Greenwich Mean Time (GMT). In some cases, the date and time of the 
zone specified on the GPS device is indicated.

COP

Y