32
These instructions are continued from Chapter 1.
1
Turn the <
5
> dial to select [
Address setting
],
and then press <
0
>.
2
If you set the DNS server setting to [
Disable
], the
screen on the left is displayed.
Press <
0
> to select the input position, and then
turn the <
5
> dial to enter the IP address of the
FTP server.
If you set the DNS server IP address setting to
[
Auto assign
] or [
Manual setting
], the screen on
the left is displayed.
For instructions on screen operations, see “Virtual
Keyboard Operation” (p.29).
Enter the FTP server’s server name or IP address.
3
In [
Port number setting
], enter 00021, in most
cases.
Turn the <
5
> dial to select [
OK
], and then press
<
0
> to go to the next screen.
4
Complete the [
Passive mode
] settings.
If an Error 41 (“Cannot connect to FTP server”) is
displayed in step 8, setting [
Passive mode
] to
[
Enable
] may resolve it.
5
Complete the [
Proxy server
] settings.
Turn the <
5
> dial to select [
OK
], and then press
<
0
> to go to the next screen.
Configuring FTP Communication Settings
COP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
