![background image](/i/canon/154183/canon-wireless-file-transmitter-wft-e7-b/h/canon-wireless-file-transmitter-wft-e7-b-073.png)
73
Positioning the Slave Cameras
Do not use multiple flash units. Although slight, there is a difference in the shutter release timing
which may cause out-of-sync flash firing and inadequate exposure.
Linked shooting is not possible when master and slave cameras are set to [
Mirror lockup
]
[
Enable
] or [
Enable:Mirror down w/
s
].
During linked shooting, when you press the AE lock or depth-of-field preview button, the camera
adjusts the focus and meters as if you had pressed the shutter button halfway.
Once you have established a connection between the master camera and slave cameras, the
settings are retained even after you replace the batteries.
If you will no longer use a slave camera in linked shooting, set [
Communication mode
] to
[
Disconnect
] on that slave camera.
Any cameras compatible with linked shooting, when they have WFT series transmitters attached,
can be used as slave cameras, regardless of model.
COP
Y