120
Erasing Still images
You can erase still images one at a time or all at once.
Be careful when erasing still images. Erased still images cannot be recovered.
Erasing a still image that had a custom preset file embedded (recorded with the
[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.
Protected still images (
121) cannot be erased.
Erasing a Single Still Image
1. Select the still image you wish to erase.
2. Press the SELECT/SET dial to open the still image operations menu.
In
mode, the menu appears when you press the dial while you are reviewing a still image,
or immediately after recording a still image.
3. Select [
IMAGE ERASE].
4. Select [ERASE].
The image is erased and the previous image appears.
5. Select [
CLOSE] to close the menu.
Erasing All Images
1. Open the menu and select [CARD OPERATIONS].
2. Select [ERASE ALL IMAGES].
3. Select [YES] and close the menu.
All still images except the protected ones are erased.
MENU
(
25)
CARD OPERATIONS
ERASE ALL IMAGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
