![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-109.png)
CAUTION
●
The battery could run down if the seat heater
is operated while the engine is not running.
●
Do not use the seat heater for extended pe-
riods or when no one is using the seat.
●
Do not put anything on the seat which insu-
lates heat, such as a blanket, cushion, seat
cover, etc. Otherwise, the seat may become
overheated.
●
Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may result in damage to the heater.
●
Any liquid spilled on the heated seat should
be removed immediately with a dry cloth.
●
When cleaning the seat, never use gasoline,
thinner, or any similar materials.
●
If any abnormalities are found or the heated
seat does not operate, turn the switch off
and have the system checked by an INFINITI
dealer.
The front seats are warmed by built-in heaters.
The switches located on the center console can
be operated independently of each other.
1. Start the engine.
2. Turn the control knob
䊊
A
to the right
䊊
1
and select the desired heat range.
●
For high heat, turn the knob to the right
䊊
1
.
●
For low heat, turn the knob to the left
䊊
2
.
●
The indicator light
䊊
B
will illuminate when
the heater is on.
3. To turn off the heater, return the knob to
the OFF position
䊊
3
. Make sure that the
indicator light turns off.
The heater is controlled by a thermistor,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
SSS0911
HEATED SEATS (if so equipped)
2-38
Instruments and controls
췽
—
—
07/31/08—tbrooks
墍