![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-292.png)
PRECAUTIONS ON CRUISE CONTROL
●
If the cruise control system malfunctions, it
will cancel automatically. The SET indicator
on the dot matrix crystal display will then
blink to warn the driver.
●
If the engine coolant temperature becomes
excessively high, the cruise control system
will be canceled automatically.
●
If the SET indicator blinks, turn the cruise
control main switch off and have the system
checked by your INFINITI dealer.
●
The SET indicator may sometimes blink
when the cruise control main switch is
turned
ON
while
pushing
the
RESUME/ACCELERATE, SET/COAST or CAN-
CEL switch. To properly set the cruise control
system, perform the steps below in the order
indicated.
WARNING
Do not use the cruise control when driving un-
der the following conditions:
●
when it is not possible to keep the vehicle at
a set speed
●
in heavy traffic or in traffic that varies in
speed
●
on winding or hilly roads
●
on slippery roads (rain, snow, ice, etc.)
●
in very windy areas
Doing so could cause a loss of vehicle control
and result in an accident.
CAUTION
On manual transmission models, do not shift
into N (Neutral) without depressing the clutch
pedal when the cruise control is set. Should
this occur, depress the clutch pedal and turn
the main switch off immediately. Failure to do
so may cause engine damage.
1. RESUME/ACCELERATE switch
2. SET/COAST switch
3. CANCEL switch
4. MAIN (ON·OFF) switch
CRUISE CONTROL OPERATIONS
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h) without
keeping your foot on the accelerator pedal.
To turn on the cruise control,
push the MAIN
switch on. The CRUISE indicator will come on.
To set cruising speed,
accelerate your vehicle to
the desired speed, push the SET/COAST switch
and release it. (The CRUISE SET indicator will
SSD0600
CRUISE CONTROL
Starting and driving
5-19
췽
—
—
07/26/08—pattie
墍