![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-054.png)
1.
If you must install a booster seat in the
front seat, adjust the seatback so that it is
upright and then move the seat to the rear-
most position. Do not move the seat with
the booster seat attached to it.
2. Position the booster seat on the seat.
Only place it in a front-facing direction.
Always follow the booster seat manufac-
turer’s instructions.
3. The booster seat should be positioned on
the vehicle seat so that it is stable. If
necessary, adjust or remove the head
restraint to obtain the correct booster
seat fit. (See “FRONT SEAT ACTIVE HEAD
RESTRAINTS” earlier in this section.) If the
head restraint is removed, store it in a
secure place. Be sure to reinstall the head
restraint when the booster seat is re-
moved. If the seating position does not
have an adjustable head restraint and it is
interfering with the proper booster seat
fit, try another seating position or a dif-
ferent booster seat.
4. Position the lap portion of the seat belt
low and snug on the child’s hips. Be sure
to follow the booster seat manufacturer’s
instructions for adjusting the belt routing.
5. Pull the shoulder belt portion of the seat
belt toward the retractor to take up extra
slack. Be sure the shoulder belt is posi-
tioned across the top, middle portion of
the child’s shoulder. Be sure to follow the
booster seat manufacturer’s instructions
for adjusting the belt routing.
SSS0640
Center position
LRS0451
Outboard position
LRS0452
Safety — Seats, seat belts and supplemental restraint system
1-37
췽
—
—
07/23/08—pattie
墍