![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-298.png)
VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE OPERATION
Always pay attention to the operation of the
vehicle and be ready to manually control the
proper
following
distance.
The
vehicle-to-
vehicle distance control mode of the Intelligent
Cruise Control (ICC) system may not be able to
maintain the selected distance between ve-
hicles (following distance) or selected vehicle
speed under some circumstances.
The vehicle-to-vehicle distance control mode
uses a sensor
䊊
A
located on the front of the
vehicle to detect vehicles traveling ahead. The
sensor generally detects the signals returned
from the reflectors on a vehicle ahead. There-
fore, if the sensor cannot detect the reflector on
the vehicle ahead, the ICC system may not
maintain the selected distance.
The following are some conditions in which the
sensor cannot detect the signals:
●
When the reflector of the vehicle ahead is
positioned high on the vehicle (trailer, etc.)
●
When the reflector on the vehicle ahead is
missing, damaged or covered
●
When the reflector of the vehicle ahead is
covered with dirt, snow and road spray
Sedan — Type A
SSD0624
Sedan — Type B
SSD0625
Coupe — Type A
SSD0662
Coupe — Type B
SSD0663
Starting and driving
5-25
췽
—
—
08/01/08—tbrooks
墍